Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Garland
Gate installation in Garland, TX typically runs between $1,800 and $6,500 for a complete driveway gate with operator, depending on the gate style, materials, and whether we’re retrofitting an existing opening or starting fresh. Most installations are completed in one to three days once materials are on site. If you’re calling from Garland, a live person answers at (432) 249-5492, any hour, any day. We know the 75040, 75041, and 75042 corridors well, and we’ve spent years working around the soil conditions that make gate work here different from anywhere else in the Metroplex.
Garland homeowners deal with something most gate companies never talk about: expansive black-clay soil that moves. A gate hung level in spring can be visibly canted by fall. That’s not a workmanship problem. It’s a soil problem, and it changes how posts should be set, what hinges make sense, and whether an old gate is worth saving. We build for that reality.
Why Ironworks Gate Co. Is Garland’s Preferred Gate Installation Company
We’ve been at this work for over 42 years, founded in 1984, and we plan to be here another forty. That matters in Garland, where the housing stock along Belt Line Road and around Duck Creek dates to the late 1950s through early 1980s. A lot of those original gates are still hanging, and a lot of them are tired. Homeowners here tend to call us after a handyman or a one-truck outfit has already been out twice, and the gate still drags or the motor still hums without opening. Our reputation in Garland is built on fixing what others walked away from, then standing behind it in writing with the 90-Day Done Right Promise.
Every job we complete in Garland is protected by that written guarantee. No paperwork, no arguing. If it’s not right, we come back and make it right. That’s the Keystone Standard, and it applies whether we’re hanging a new double swing gate in a 1960s ranch near Duck Creek or retrofitting an old sliding gate off Jupiter Road.
Our technicians are background-checked and uniformed. They work in your home the way they’d work in their own mother’s. And when you call about scheduling, a live person picks up. Not a voicemail tree. Not a call center. That’s true at 2:00 PM and at 2:00 AM.
Our Gate Installation Services in Garland
We handle the full scope of driveway and estate gate work in Garland: gate repair, gate installation, gate motors and openers, gate access control, and gate parts and welding. Our Gate Installation team covers everything from hinges and welds to keypads and automation. Here’s what Garland homeowners most often call us for.
Driveway Gate Installation
A new driveway gate in Garland is an investment in both security and curb appeal, and it’s one of the last big upgrades you make to a home you plan to stay in. We install single and double driveway gates, steel or ornamental iron, with operators matched to the gate’s weight and the opening’s geometry. In Garland, we set steel posts below the clay line so the gate doesn’t start leaning within two years.
Pedestrian Gate Installation
Pedestrian gates get more cycles than driveway gates, and they’re the first thing to sag when wood posts rot at grade. In older Garland neighborhoods around 75041, we commonly replace wood-framed yard gates with welded steel frames and adjustable hinges. The result opens and closes square, and it stays that way through wet and dry seasons.
Sliding Gate Installation
Sliding gates work well on Garland lots where a swing gate would arc into the street or a sloped driveway. We install track and cantilever slide systems. Cantilever is our usual recommendation for Garland’s clay, because the gate rides on posts rather than a ground track that gets fouled by soil movement and debris.
Swing Gate Installation
Swing gates are the most common style we install in Garland, and for good reason. They suit the ranch-style architecture that dominates the 75040 and 75042 corridors, and they’re the most straightforward to automate. The key in this city is the post. Set steel deep, below the active clay zone, and the gate stays plumb. Skimp there, and you’ll be calling someone back in 18 months.
Double Gate Installation
Double swing gates need both posts plumb and exactly square to each other, or the leaves will bind at the center. We see a lot of Garland double gates from the 1970s where one post has moved and the gate hasn’t latched cleanly in years. We reset, re-hang with adjustable hinges, and often pair it with a modern operator with safety photocells.
Security Gate Installation
Security gates in Garland often mean a steel gate with a keypad, intercom, or vehicle sensor. We install the gate and the access system, and we make sure the operator has the entrapment protection required by current UL 325 safety standards. Many older automated gates in Garland predate those standards entirely.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Garland
We’re trained and equipped on nine gate-automation brands, so whatever is on your driveway, we can work on it. In Garland, we regularly service and install Ghost Controls, DoorKing, Elite, and Mighty Mule systems, along with LiftMaster, FAAC, BFT, Linear, and Viking. Because we carry parts for these operators locally, a repair in Garland often doesn’t need a second trip. The correct fix gets made on the first visit.
Common Gate Installation Problems We See in Garland Homes
The gates we replace in Garland usually fail for the same handful of reasons. Here’s what we find most often in the 75040, 75041, and 75042 corridors.
- Hinge posts rotted at grade and tilting from clay-swell pressure. Original 4×4 wood posts set in shallow concrete rot where they meet the soil, and the expanding clay pushes them sideways. The gate starts dragging, and the latch stops lining up.
- Shallow concrete footings cracked and heaved within two or three years. Even recently installed gates come out of plumb when the footing wasn’t dug below the active clay zone. We reset those posts in steel, not wood.
- Legacy operators without modern entrapment protection. Many Garland gates from the 1980s and 1990s run on control boards that predate UL 325 safety requirements. Those boards also fail after power surges, and the humidity near Lake Ray Hubbard accelerates corrosion on terminals and wiring.
- Wood gates warped by North Texas heat and humidity. Summers above 100°F warp and crack wood, and the sustained moisture from Garland’s eastern lake edge accelerates rot. Steel frames with welded joinery hold their shape through every season.
Pricing for Gate Installation in Garland, TX
What you’ll pay for a gate installation in Garland depends on what you’re hanging and what it’s hanging from. A basic steel pedestrian gate runs about $800 to $1,600 installed. A single swing driveway gate, steel, with a new operator, typically runs $2,800 to $4,800. Double swing gates start around $3,500 and can reach $6,500 with ornamentation. Sliding gates, especially cantilever systems, run $4,000 to $7,500 installed. If posts need to be reset, add $400 to $900 per post depending on depth and steel size. All of this is quoted and agreed before any work starts, in writing, so the price on the estimate is the price on the invoice.
We Also Serve Cities Near Garland
While this page focuses on Gate Installation in Garland, our crews also run regular routes through Sachse, Rowlett, Richardson, and Wylie. If you’re just outside the city limits, call us. We’ll tell you straight whether you’re in our standard service area for the week.
Serving Garland, TX - Our Local Coverage Area
We’re based in the Garland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Garland
In Garland, steel gate posts should extend at least 36 to 42 inches below grade, through the active clay zone, with concrete poured around them. The goal is to anchor below the depth where the soil actually swells and shrinks. The black-clay layer can move dramatically between wet and dry cycles, and a post that only goes down 24 inches will heave with the soil, no matter how much concrete sits on top. Adjustable hinge hardware also helps, letting you re-plumb the gate as the soil settles. Call (432) 249-5492 and we’ll assess your exact soil and post depth before quoting any work.
Many older swinging wood gates in Garland can be retrofitted with a modern operator, provided the posts are still sound and the gate structure isn’t sagging beyond adjustment. We’ve done this repeatedly on 1960s and 1970s ranch homes. The key is the post condition and the gate’s weight. If the wood is rotted at the hinges or the post leans more than an inch or two out of plumb, retrofitting just postpones replacement. We’ll tell you honestly which route makes sense for your gate and your budget.
Homes near Lake Ray Hubbard sit on an active moisture gradient where black-clay soil swells and shrinks so aggressively that a gate hung level in spring can be visibly canted by fall. Even a recent install will drift if the posts weren’t set in steel, deep enough, with adjustable hardware. The moisture coming off the lake keeps the soil expanding, and when it dries in late summer, the clay contracts. This cycle moves posts incrementally every year. We reset the posts below the clay line and use adjustable hinges so the gate stays true through every cycle.
Automatic gates in Garland fall under UL 325 entrapment protection requirements, which mandate safety photocells, reversing edges, or both, depending on the gate type and operator. Older openers from the 1980s and 1990s typically lack these features, and control boards corrode over time from the humidity on the city’s eastern edge. In most cases, we can upgrade the control board and add photocells rather than replacing the whole operator. For seriously outdated systems, replacement is the safer and often cheaper long-term answer. Call (432) 249-5492 and we’ll assess what your current opener can support.
If your Garland driveway is flat and has room, a swing gate on deep-set steel posts is usually the simpler choice. If the driveway slopes upward or the front yard is tight, a cantilever slide gate may be the better answer, because it doesn’t rely on a ground track that shifts with clay movement. On seriously expansive lots, a swing gate gives us more room to use adjustable hinges, which are the practical solution to Garland’s soil movement. We’ll look at the driveway, the slope, and the soil, then give you a straight recommendation with a written price.
Call Ironworks Gate Co. for Gate Installation in Garland
Garland’s gates fail differently than gates in Plano or Mesquite. The soil, the lake air, the age of the homes, the original hardware that was never built for any of it. We’ve spent 42 years learning what survives out here, and we put it into practice on every gate we hang. If your gate is dragging, leaning, or done for, call (432) 249-5492 for a free estimate. A live person answers, and the price we quote is the price you’ll pay. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., specializing in gate installation, repair, and automation across the Dallas-Fort Worth metro since 1984.