Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Garland
Gate repair in Garland usually comes down to one of two things: a post that has moved, or an opener that has quit. On the older ranch homes that fill the 75040, 75041, and 75042 corridors, we see both constantly. The black clay under Garland expands and contracts with every rain and dry spell, and gates that were level in May are binding by September. If your gate drags, sags, or has stopped responding to the remote, call us at (432) 249-5492. We know this soil, we know these neighborhoods, and we quote every job before we turn a single bolt.
Key takeaways:
- Most Garland gate repairs are post-reset, hinge, or opener jobs, and most are completed in one visit.
- We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators.
- Every repair is protected by our written 90-Day Done Right Promise.
- A live person answers the phone 24 hours a day, 7 days a week.
Why Ironworks Gate Co. Is Garland’s Preferred Gate Repair Company
We have spent more than 42 years repairing and rebuilding gates across North Texas, and Garland is one of the tougher markets for gate work. The soil shifts, the lake humidity eats steel, and a lot of the housing stock still carries the original gate hardware from the 1960s and 1970s. That combination produces failures generalist handymen do not understand well enough to fix permanently. Our Gate Repair team has reset posts, replaced legacy operators, and retrofitted safety edges on hundreds of Garland properties, from the lake-facing streets of 75041 to the older neighborhoods west of downtown.
We work with background-checked, uniformed technicians who follow our K.E.Y.S. values code: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same care as the first. Our crews are dispatched locally to Garland from our Dallas-Fort Worth office, and a live person answers every call at (432) 249-5492, day or night. No voicemail trees. No Monday morning callback. If you live in Garland and your gate is down, you can reach a person who knows what to do, right now.
Victor Salinas, who leads our team, has built this company on a simple standard: the job is not done until the gate works like it should, and every completed job carries a written 90-Day Done Right Promise. If anything is not right, we come back and make it right. No paperwork, no arguments.
Our Gate Repair Services in Garland
Hinge & Post Repair
This is the most common call we take in Garland, especially in the 75040 and 75041 neighborhoods where original 4×4 wood posts were set in shallow concrete decades ago. Garland’s black clay swells in spring rains and cracks in summer drought, and those old posts either rot at grade or lean until the gate will not latch at all. We cut out rotted posts, bore new footings 30 inches deep or more with a bell bottom, and set pressure-treated posts in high-strength concrete. On gates that keep drifting, we install adjustable hinge hardware so future seasonal movement can be corrected without another full reset. A typical hinge and post repair in Garland runs $300 to $650, depending on how many posts are involved and whether we are dealing with wood or steel.
Gate Realignment
Realignment is not just tightening a hinge screw. On older Garland swing gates, especially the wood ranch-style gates common to homes built between the late 1950s and early 1980s, years of clay-swell cycles have pulled the entire leaf out of square. The latch no longer lines up, the gate scrapes the drive, and the hinges carry load unevenly until something breaks. We re-hang the gate evenly, correct the hardware alignment, and address the underlying post or hinge cause so it stays right. Realignment jobs in Garland typically run $180 to $350 per gate leaf.
Electric Gate Repair
Electric gates fail in two ways in Garland: the motor or control board dies without warning, or the gate physically binds against a shifted post and burns out the operator trying to push through. We see a lot of pre-2000 operators in Garland’s older neighborhoods, units from DoorKing, Linear, Elite, and other brands that have not had replacement parts available for years. When a control board goes out and no board exists, the honest answer is a full operator swap, not a patch. We carry or can quickly source replacement motors, control boards, keypads, and photocells for nine major opener brands, and most electric gate repairs in Garland are completed in a single visit at $250 to $550 for common repairs and $900 to $1,800 for full operator replacement.
Automatic Gate Repair
Automatic gate repair covers the automation side: motors, swing arms, slide-gate chains, remote receivers, keypads, and the wiring between them. In Garland, the proximity to Lake Ray Hubbard adds sustained humidity that accelerates corrosion on exposed wiring and terminal blocks, particularly in the eastern edges of 75041. Connections oxidize, circuits short, and gates behave erratically. We trace the fault, repair or replace the component, and test the full logic cycle before we leave. Automatic gate repair in Garland typically runs $200 to $600 for component-level fixes and higher when a full operator is needed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Garland
We are trained and equipped on nine gate-automation brands, so whatever is on your driveway, the fix is made right on the first visit. In Garland we regularly service Ghost Controls, DoorKing, Elite, and Mighty Mule systems, along with LiftMaster, FAAC, BFT, Linear, and Viking. Because we specialize exclusively in driveway and estate gates, we stock the common replacement parts and diagnostic tools for these brands locally, which means a faster turnaround when your operator has gone down. If your old DoorKing or Linear board is obsolete, we will tell you plainly and quote a replacement rather than stringing the repair along.
Common Gate Repair Problems We See in Garland Homes
- Posts heaving out of clay soil. Garland’s expansive black clay swells and shrinks with every wet-dry cycle, lifting shallow-set posts and cracking concrete footings. Posts set level in spring can be 2 to 3 inches out by fall, especially east of the industrial corridor near Lake Ray Hubbard.
- Rotted 4×4 wood posts on 1960s-1980s ranch gates. The original posts under many older Garland driveway gates were never rated for ground contact, and after 40 or 50 years in clay soil they are rotten at grade and structurally gone.
- Legacy control boards failing without warning. Pre-2000 electric gate operators from DoorKing, Linear, and other brands contain circuit boards that fail suddenly, leaving gates stuck mid-travel. Many of those boards are no longer manufactured, which means an operator replacement is the realistic fix.
- Rust from Lake Ray Hubbard humidity. Homes near the lake side of Garland get more sustained moisture than the rest of the city, and that humidity accelerates corrosion on steel hinges, welds, slide-gate tracks, and electrical terminals. We regularly find rusted-through hinge barrels and seized hardware on otherwise sound gates.
Pricing for Gate Repair in Garland, TX
Most gate repairs in Garland fall into predictable ranges. Hinge and post repairs typically run $300 to $650. Gate realignment usually lands between $180 and $350 per leaf. Common electric gate repairs, like a motor capacitor, receiver board, or limit switch, run $250 to $550. Full automatic operator replacements run $900 to $1,800 depending on operator type and access. If we find a legacy DoorKing or Linear board that has no available replacement, we will tell you the full-swap price rather than sell you a temporary patch. Every quote is written and agreed before any work starts, so there is no surprise on the bill. We also offer standing discounts for Garland clients: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. Call (432) 249-5492 for a free estimate.
We Also Serve Cities Near Garland
Our Garland crews also cover the surrounding communities of Sachse, Rowlett, Richardson, and Wylie. If you are just outside the Garland city limits and need gate work done right, call the same number and ask for our Garland team. We schedule from our Dallas-Fort Worth office and dispatch locally, so response times stay short across the east Metroplex.
Serving Garland, TX - Our Local Coverage Area
We’re based in the Garland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Garland
Because the black clay under Garland never stops moving. The soil expands when wet and contracts when dry, and east of the industrial corridor the moisture gradient from Lake Ray Hubbard keeps that cycle active year-round. A post set in a shallow footing, even one that looks solid, gets worked loose by the repeated swelling and shrinking until it leans again. The fix that lasts in Garland is a deeper footing with a wider bell bottom above well-drained fill, plus adjustable hinge hardware so seasonal drift can be corrected without digging the post out again. Call (432) 249-5492 to have us assess your post footing, and we will quote the reset before starting.
Sometimes, but not often. Many DoorKing and Linear control boards from that era are no longer manufactured, and there is no source for new-old-stock replacements. If your board is one of the obsolete models, repairing it is usually not economical, and we will recommend a full operator swap to a current model that has parts available. That replacement is quoted in advance and most swaps are completed in one visit, typically in the $900 to $1,800 range for Garland homeowners. Call (432) 249-5492 and we will identify your opener and tell you honestly whether it is repairable.
Sag correction addresses the three failures that make an old wood gate drag: a hinge post that has leaned from clay movement, hinge hardware that has worn or separated, and a gate leaf that has pulled out of square from years of uneven load. In Garland’s 1960s and 1970s ranch housing, we commonly find the original 4×4 post rotted at grade and heaved out of plumb, which means no amount of latch adjustment will ever bring the gate back true. We reset the post, re-hang the leaf square, and add an anti-sag truss or adjustable hinges where needed. The goal is a gate that closes like the day it was hung, and the work is protected by our 90-Day Done Right Promise. Call (432) 249-5492 for a free estimate on sag correction in Garland.
No, and that is a safety issue we take seriously. Automatic gate operators manufactured before modern safety standards often lack photocells, edge sensors, or auto-reverse features that prevent the gate from closing on a person, child, or vehicle. If your Garland gate predates these safety requirements, we recommend adding them. On many older operators this is a straightforward retrofit; on some legacy units the safety inputs do not exist and the operator itself needs replacing. We will not repair a gate that remains unsafe. Call (432) 249-5492 and we will inspect your gate and explain your options, with a written quote before any work.
Because the gate track or the gate itself is moving. On Garland’s expansive clay, a recently installed slide gate can be out of alignment within a season, especially in the eastern neighborhoods near Lake Ray Hubbard. When the track shifts even slightly, the rack and pinion mesh at the wrong angle and the teeth strip under load, and the problem repeats because the underlying misalignment is never corrected. The permanent fix is to stabilize the track, address the post or slab movement, and then replace the damaged rack section. If your slide gate keeps stripping gears, call (432) 249-5492 and we will find the movement that is causing it.
We’re the Gate Team Garland Calls When It Has to Be Right
On a street of 40-year-old ranch homes near the lake-facing edge of 75041, we reset a badly tilted hinge post on a 1970s wood swing gate. The original 4×4 post had rotted at grade and heaved more than 3 inches out of plumb after decades of clay swell. We cut the old post free, bored a new footing 30 inches deep with a wider bell bottom, set a pressure-treated post in high-strength concrete, and re-hung the gate with adjustable hinge hardware so the owner can correct future seasonal drift without another full reset. That is the difference between patching a Garland gate and fixing it. We have been doing this for over 42 years, and we plan to be doing it for another forty.
If you live anywhere in Garland and your gate is sagging, stuck, noisy, or dead, call (432) 249-5492. We answer live, we give you a written price before any work begins, and we stand behind every job with our 90-Day Done Right Promise. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Garland, TX.