Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Installation Across Rowlett
A new driveway gate in Rowlett typically runs $2,800 to $7,500 installed, depending on the material, width, and whether we’re adding automation. Most installations take one to two days on site once the gate and opener are ordered. If you’re calling from a neighborhood off Dalrock Road or near the lake, we know the soil and moisture conditions your posts will face, and we plan the footings accordingly. Call (432) 249-5492 and we’ll quote a firm price before any work starts.
Rowlett is not Garland, and it’s not Wylie. Living on the western shore of Lake Ray Hubbard means your gate hardware breathes wetter air and your posts sit in soil that moves more than most of Dallas County. That changes how a gate should be installed here. We build for it.
Why Ironworks Gate Co. Is Rowlett’s Preferred Gate Installation Company
We’ve been in the gate business for over 42 years, and the calls we take from Rowlett have a pattern we recognize immediately. A builder-grade operator from the 2016-2018 rebuild era starts grinding. A manual gate the homeowner always intended to automate never got a power run during construction. A post that was dead plumb when the house closed has drifted two inches toward the lake. None of this surprises us, and all of it is fixable.
Our Gate Installation team works in Rowlett regularly. A live person answers our phone 24 hours a day, seven days a week, because Victor Salinas set it up that way on purpose. No voicemail tree. No “we’ll call you back Monday.” When a swing gate won’t close at 9 p.m. on a Saturday and your dog is eyeing the opening, you get a person. That matters here.
Every job is protected by our 90-Day Done Right Promise: a written guarantee, no paperwork shuffle, no arguing. If it isn’t right, we come back and make it right. The 400th job gets the same care as the first.
Local Knowledge That Shows Up on the Site
We know where the clay is heaviest in Rowlett, and we know which subdivisions off Chiesa Road and Miller Road sit on the worst shrink-swell soil. We know that gates near the 75088 shoreline rust faster than gates in 75089. We know the difference matters, and we install accordingly, with deeper concrete piers, sealed post caps, and corrosion-resistant hardware where the job calls for it.
Our Gate Installation Services in Rowlett
Driveway Gate Installation
Most Rowlett driveway gates we install are ornamental steel or wrought iron, built to match the subdivision’s original fencing. But the real difference is what’s under the ground. In Rowlett’s black clay, a driveway gate post needs a deeper pier than a fence post, usually 36 to 48 inches, and we set it in concrete that’s been poured to account for seasonal heave. Skip that step and the gate will bind within two seasons. A standard single swing driveway gate in Rowlett runs $2,800 to $4,500 for manual operation; adding an opener pushes it to $4,200 to $7,500.

Pedestrian Gate Installation
Side-yard pedestrian gates in Rowlett’s 1980s-2000s subdivisions tend to be narrower and lighter, but they still take a beating from the humidity. We install pedestrian gates with powder-coated steel frames, stainless hinges, and self-closing hinges or magnetic latches where needed. A manual pedestrian gate install in Rowlett runs $800 to $1,600. If you want it on a keypad or tied into your driveway opener, expect $1,500 to $2,800 total.

Sliding Gate Installation
Sliding gates are the right call for Rowlett driveways with a slope or a short setback. But they demand a level track, and level is a moving target on expansive clay. We build the track bed with compacted base and set the posts deep enough to resist frost heave and drought movement. A single sliding gate with a cantilever frame in Rowlett typically runs $3,500 to $8,000 depending on the length. Automation adds $1,200 to $2,500 on top, but the track and post work is what makes or breaks it.

Swing Gate Installation
Swing gates are the most common style in Rowlett, especially on the double-wide driveways in 75030 and 75088. We build them as single or double gates, using welded steel frames with pickets matched to your existing fence line. The operator mounting is where humidity does its worst work: we seal control boards, use stainless fasteners, and mount motors with drainage in mind. A single swing gate install runs $2,500 to $4,800; a double swing gate runs $4,500 to $8,500.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Rowlett
We’re trained and equipped on nine gate-automation brands, and we install them all. In Rowlett we most often put in Ghost Controls and Viking operators for residential swing gates, and DoorKing for heavier or commercial-style driveway work. If you already have an Elite or Mighty Mule opener that’s been in service for years, we’ll install the new gate around it or replace it cleanly. We keep a full parts stock for these brands on the truck, so a Rowlett install doesn’t stall out waiting on a bracket from a warehouse.
Common Gate Installation Problems We See in Rowlett Homes
- Lakeside humidity corroding iron hardware and motor housings. Rowlett’s position on Lake Ray Hubbard means the air holds more moisture than inland suburbs. We regularly replace rust-pitted hinges and oxidized control boards on gates that are only 5 to 8 years old.
- Builder-grade operators from the 2016-2018 rebuild failing early. After the December 2015 tornado, a wave of homes went up fast in the 75088 ZIP, and many got the cheapest operator available. Their plastic gearboxes strip and their boards corrode in lake air. We’re now replacing them on a rolling schedule.
- Manual gates installed during construction with no power or conduit. Newer Rowlett subdivisions have plenty of manual driveway gates that were never wired for automation. That means trenching, pulling a circuit, and setting a post for the operator arm. We do that work in-house.
- Posts heaving and pulling gates out of alignment. Rowlett’s expansive clay cycles between wet and dry every year, and posts move with it. A gate that was true when it was hung is now racked and dragging. We reset posts, re-plumb the frame, and re-align the operator.
Pricing for Gate Installation in Rowlett, TX
Here’s what Rowlett homeowners can expect to pay for gate installation as of this year. A basic ornamental steel single swing gate, manual, runs $2,800 to $4,500. A double swing gate in powder-coated iron runs $4,500 to $8,500. Sliding gates run $3,500 to $8,000 depending on length and track work. Automation adds $1,200 to $2,500 if we’re running a new opener. Conduit and power runs, which a lot of Rowlett homes need before automation, run $600 to $1,800 depending on the trench length and whether we’re going through asphalt or grass. You get a firm, itemized price before the first bolt comes off the truck, and that price is agreed in writing. Nothing on the invoice surprises you. Call (432) 249-5492 for a free estimate.
We Also Serve Cities Near Rowlett
Most of our Rowlett jobs come from referrals in Sachse, Garland, Wylie, and Rockwall. We dispatch to all four regularly, and the same crew that installs on the lake side in Rowlett will handle your gate in any of those cities. If you’re reading this from one of them, our Gate Installation in Rowlett service area extends to you, and the same pricing and written promise apply.
Serving Rowlett, TX - Our Local Coverage Area
We’re based in the Rowlett area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Rowlett
Your gate posts shift when Rowlett’s black clay dries and shrinks. The post moves a fraction of an inch, the gate drags, and the operator strains until it binds or trips its limit switch. The fix is re-setting the post with a deeper concrete pier, not just adjusting the arm. Call us at (432) 249-5492 and we’ll check the post movement first.
It takes a power source, usually a 120-volt circuit, and often a conduit run because most newer Rowlett builds didn’t include one. We trench from your panel or an exterior outlet to the gate post, pull wire, set the operator post, and mount the opener. A typical near-lake install with a 30 to 40 foot conduit run runs $1,500 to $3,000 including the opener. We give a written price before we start.
The 75088 ZIP, especially the neighborhoods closest to the shoreline, gets the worst of it. The ambient moisture is highest off the water, and we see rust pitting and board corrosion there earlier than in 75089 or 75030. Gates in all three ZIP codes benefit from corrosion-resistant hardware and sealed electronics, but shoreline homes in 75088 need it most.
That storm seized track components and bent arms across Rowlett. Ice expanded the track joints, then thawed and left gaps. Water got into the operator housing, and the gate started stalling. If your gate has never been right since February 2021, we’ll inspect the track, replace the bearings, and re-level the bed. Call (432) 249-5492, and we’ll quote the repair before we start.
Check that your posts are plumb and have enough depth for the operator’s torque. In Rowlett’s clay, a post that’s 2 to 4 inches off vertical will wear the operator out fast. Check for rust at the hinge points, and confirm you have a power source within reach. If you’re not sure, we’ll check all three during the free estimate. Call (432) 249-5492.
Call Ironworks Gate Co. for Gate Installation in Rowlett, TX
If your gate is leaning, rusting, manual, or the operator is giving up, call us. We’ll send a uniformed, background-checked technician who works the same way we’d work in our own mother’s yard. Victor Salinas set the standard: K.E.Y.S. - Krafted right, Every time, Your home first, Standing behind it. That applies to every gate we hang in Rowlett.
Call (432) 249-5492 for a free estimate. A live person answers, day or night.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Rowlett and the Dallas-Fort Worth metro for over 42 years.





Before
After
Before
After
Before
After