Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in Wylie, TX | Ironworks Gate Co.
Ghost Controls Gate Repair in Wylie usually runs between $180 and $420 depending on whether it’s a control board, limit switch, or full motor replacement. We’re an independent service provider, not a manufacturer-authorized shop, and we carry genuine Ghost Controls boards and gear kits for same-day turnaround across Wylie’s HOA neighborhoods. What makes our work different here is simple: we know how Lake Lavon clay shifts your posts and throws your AXXESS or TSS1 out of spec. Call (432) 249-5492 and tell us what your gate is doing wrong.
Why Wylie Residents Choose Us for Ghost Controls Service
We work on Ghost Controls openers every week in Wylie, from the current AXXESS line to the older GTO/PRO series still running on hundreds of side-yard gates in neighborhoods like Woodbridge. You’ll get a technician who knows these units down to the relay and gear level, not a generalist who has to look up the model number on his phone. Victor Salinas, our owner, learned the mechanical and welding side of the trade at Collin College in McKinney and has spent nearly three decades fixing what other crews left half-finished around Collin County. When we arrive at a Wylie gate, we already know what the clay soil does to the posts, what the summer heat does to the solar batteries, and what the humidity near the lake does to the board connectors. That’s why most Ghost Controls jobs we take are done in a single visit, with the price settled before we turn a bolt. Every repair is covered by our written 90-Day Done Right Promise.
Common Ghost Controls Gate Repair Problems We Solve in Wylie
- Control board relay burnout on double-swing gates. Wylie’s shrink-swell clay knocks posts out of plumb, and when a double gate binds mid-cycle, the motor pulls high resistance until the relay cooks. We see this most on ornamental iron gates in post-2000 subdivisions where both posts lean at slightly different angles.
- Limit switch drift and false obstruction triggers in summer. Ghost Controls solar-charged batteries sag under North Texas heat, and when voltage drops, the limit logic gets twitchy. Your gate stops halfway and reverses. In Wylie’s July and August, this is one of our most common calls.
- Stripped plastic worm gear in AXXESS operators. When a sagging gate slams into an unadjusted close limit, the worm gear takes the hit. After enough slams, the AXXESS whines and loses position. We stock OEM-spec gear kits locally so this is usually a same-day repair.
- Corrosion and intermittent remote loss from moisture near Lake Lavon. The eastern edge of Wylie sits on higher groundwater, and that humidity finds its way into battery compartments. Connectors corrode, the remote drops out, and the opener behaves like it’s possessed. We clean, reseal, and replace the board when it’s too far gone.
- Legacy GTO/PRO systems with dead motors on heavy Wylie gates. Older Ghost Controls units were never built for the weight of a 16-foot decorative iron gate. We’ll tell you honestly when a rusted arm or a seized motor means a full AXXESS replacement costs less than chasing parts.
Ghost Controls Service in Wylie: What Local Conditions Mean for Your Equipment
Wylie’s eastern and southern edges run right up against Lake Lavon, and that’s where we see the worst of it. Groundwater keeps the expansive black clay swollen for months at a time, and in a single wet winter, gate posts along Lavon Drive have heaved two to three inches out of level. A Ghost Controls opener that ran silently in September can throw motor-overload faults by March because the slave arm has been pulled out of parallel and the force sensor reads that binding as an obstruction. The fix is not a new board. The fix is re-squaring the post, deeper concrete, and re-running the force-learn sequence so the opener actually understands the load it’s carrying. Drier suburbs like Murphy and Sachse don’t see this failure pattern at anywhere near the same rate. In the Woodbridge subdivision, our tech arrived to a Ghost Controls TSS1 on a 16-foot double swing that had been screaming and stopping mid-cycle. One post had heaved outward almost three inches after the fall rains. We cut the top hinges, re-squared the post with fresh concrete around a deeper collar, re-torqued the motor arm, and re-ran the TSS1’s force-learn on-site. Quiet at both limits by lunchtime, no new parts needed.
Ghost Controls Models & Products We Service in Wylie
We service the full Ghost Controls residential range across Wylie: the AXXESS series swing and slide operators (AXS1, AXS2), the TSS1 heavy-duty swing line, the legacy GTO/PRO systems still hanging on thousands of gates here, and the vehicle detection loops and solar kits that support them. When an opener is still production-current, we install genuine Ghost Controls control boards, remotes, and gear kits because the safety and auto-close logic tolerances are tight and aftermarket boards don’t always hold them. For legacy GTO/PRO parts that are no longer in channel, we use OEM-spec aftermarket gear-and-chain kits we’ve torque-tested on the heavy ornamental iron gates common in Wylie’s HOA communities. And we’ll tell you straight when a full AXXESS replacement is the cheaper long-term call than another round of component swaps.
We’re also the team to call for motor replacement on Ghost Controls AXXESS and TSS1 units, complete realignment of gates sitting on Wylie’s shifting clay, and full Ghost Controls sales & service for homeowners who want to stop patching an old unit and start fresh.
Ghost Controls Service Pricing in Wylie
Here’s what Ghost Controls repair typically costs in Wylie, based on the jobs we’ve run across this city:
- Diagnostic service call: $75-$95, credited toward the repair when you approve the work
- Limit switch adjustment or replacement: $120-$180
- Ghost Controls control board replacement (AXXESS/GTO): $210-$340
- Worm gear or gear-and-chain kit replacement: $180-$280
- Full AXXESS motor replacement: $350-$520 installed
- Post re-squaring with new concrete collar: $300-$600 depending on gate weight and post condition
What drives the price is usually post condition. A gate on stable, level posts is a straightforward parts swap. A gate that’s been heaving with Wylie clay may need realignment before any opener work makes sense, and that’s where the labor goes. Every quote is written before we start, so the number you approve is the number you pay. Call (432) 249-5492 for a free estimate on our Gate Installation in Wylie or your Ghost Controls system. We also offer $50 off any repair over $250, a free second opinion on any written estimate, and our $89 seasonal tune-up that catches limit drift before it strands your gate open at the wrong moment.
Serving Wylie, TX - Our Local Coverage Area
We’re based in the Wylie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Wylie
No, but it’s common here. Rain-swelled clay shifts your gate posts enough to bind the gate, and the Ghost Controls force sensor reads that as an obstruction and cuts the motor. The fix starts with checking post plumb, not replacing the board. Call (432) 249-5492 and we’ll tell you whether it’s a realignment or a component issue.
Both, depending on the unit. For current-production AXXESS and TSS1 openers, we install genuine Ghost Controls control boards, remotes, and gear kits because the safety and auto-close logic tolerances demand it. For legacy GTO/PRO units where Ghost Controls no longer supplies parts, we use OEM-spec aftermarket kits we’ve tested for torque on Wylie’s heavy ornamental gates. We’ll always tell you which part we’re quoting and why.
In most cases, a board replacement is all you need, and it typically runs $210-$340 in Wylie. Unless your motor is seized, the gear is stripped, or the arm is rusted through, a new board brings the opener back to spec. We’ll bench-test the motor before we ever quote you a full replacement.
If you’re in a master-planned community like Woodbridge, your HOA likely requires Architectural Review Committee approval before gate materials or styles change, even for a like-for-like repair. We flag that step before we swap any visible hardware so you don’t get fined and forced to redo the work. Same-colored, same-profile replacements usually sail through. Call (432) 249-5492 and we’ll walk you through what your specific HOA needs.
It’s more likely corrosion than a dead battery. Near Lake Lavon, Wylie’s humidity works into the receiver board and degrades range before the remote battery actually fails. We test signal strength on-site and clean or replace the receiver as needed. This is a quick fix, typically under $150, and worth calling about before you’re standing in the rain pressing the button forty times.
Service Areas Near Wylie
We run Ghost Controls repair calls across the Collin County side of the lake. If you’re in Ghost Controls service in Murphy or over in Ghost Controls service in Lavon, we cover those too. Our Wylie service area also includes Sachse, Lucas, and Parker, so if you’re on the edge of town, you’re still in range. Same trucks, same 90-Day Done Right Promise.
Book Your Ghost Controls Service in Wylie Today
Tell us what your gate is doing wrong, and Victor will tell you what it actually needs. Call (432) 249-5492 for a free estimate. A live person answers, 24 hours a day, 7 days a week. No voicemail trees, no waiting until Monday.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Wylie since 1984.