Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterWhy Wylie Homeowners Choose Ghost Controls Gate Repair
Ironworks Gate Co. provides independent Ghost Controls repair in Wylie and service across Wylie, TX, with same-week scheduling for most operator issues. We’re not a Ghost Controls authorized dealer, and we won’t pretend otherwise. What we are is a local gate company that has been servicing Ghost Controls AXS, HY, DS, and AXP series openers for years, across thousands of Wylie driveways, many of them now hitting the 15 to 20 year mark on Collin County’s shifting black clay. When a Ghost Controls opener fails in Wylie, it usually isn’t the opener’s fault alone. It’s the soil, the moisture, the heat, and the years. We fix the operator and the conditions around it. Call (432) 249-5492 for a straight diagnosis and a written price before any work begins.
Why Trust Ironworks Gate Co. for Your Ghost Controls Gate Repair?
Victor Salinas, our owner, grew up near the old downtown square in Wylie. He learned the mechanical and welding side of the trade at Collin College in McKinney, and he has spent the better part of three decades working on gates across Collin County. What Victor teaches every tech is simple: Ghost Controls openers are predictable once you understand their control boards, their limit logic, and the way their chain and belt configurations behave under North Texas load. We see the same failures repeat across Wylie neighborhoods, and that repetition is what makes our work fast and accurate.
As an independent Ghost Controls service provider, we handle what the manufacturer’s phone support can’t see from a call center: a gate post heaved out of plumb near Lake Lavon, a chain stretched from years of daily cycles, a control board enclosure that took on moisture because the original drip loop was never installed. We arrive in a marked truck with the parts that actually fail on Ghost Controls units, not a bin of generic hardware that sort of fits. And every repair carries our 90-Day Done Right Promise, in writing. No paperwork on your end. No arguing. If it isn’t right, we return and make it right.
Common Ghost Controls Gate Repair Problems We Fix in Wylie
These are the failures we see most often on Ghost Controls openers in Wylie, named by the model lines they affect:
- AXS Series swing gates that creep or stop short. The reed switch assembly that tells the AXS board where the arm is positioned gets brittle with heat and age. When it fails, the gate loses its stopping point. It’ll open partway, then drift back, or stop three feet from the post and hum. We replace the reed switch and recalibrate the travel limits, which usually restores full travel in one visit.
- HY Series hydraulic units with water in the board enclosure. The HY hydraulic swing operator is a workhorse, but its control board sits in a housing that is only as dry as the install left it. In Wylie, where spring storms roll in fast and humidity near Lake Lavon stays high, we regularly open HY boxes to find corrosion on the board terminals. A missing drip loop is almost always the cause. We clean or replace the board, then rewire the incoming power with proper drip loops so it doesn’t happen again.
- DS Series slide operators with chain tension loss. The DS slide operator drives a long chain that stretches over time, especially on wide driveway gates with heavy ornamental iron. Once the chain loses tension, the gate jerks and sags mid-travel, and eventually the chain can derail entirely. We re-tension or replace the chain, align the sprockets, and set the stop force so the motor isn’t fighting itself.
- Older AXS units that hum but won’t move. A humming motor with no arm movement on an older AXS almost always points to a failed motor capacitor. It’s a ten-dollar part that some companies won’t touch because they don’t stock it. We carry motor capacitors in the truck for the AXS line, along with the start relays that tend to fail alongside them.
- Intermittent Ghost Controls keypads and remotes. We get calls where a keypad works in the morning and won’t respond by mid-afternoon. The most common cause on Wylie installs is heat expansion affecting a wire connection at the board, not the keypad itself. We trace the circuit, re-seat and re-torque every connection, and replace the keypad only if it genuinely tests bad.
Ghost Controls Parts & Our Repair-vs-Replace Approach
For Ghost Controls control boards, motors, and safety sensors, we use OEM parts. The factory timing settings and sensitivity curves are matched to those components, and aftermarket boards rarely replicate them exactly. For routine wear items like chains, pulleys, drive belts, and gate hinges, we use high-grade aftermarket parts that meet or exceed OEM spec. That keeps the bill reasonable without shortening the life of the repair.
We stock Ghost Controls-compatible chains, pulleys, capacitors, remotes, and limit hardware on our trucks, so most Wylie repair calls are completed in a single visit. When a unit is past about 12 years old and needs both a new control board and a new motor, we tell you straight: the math usually favors a new operator. We’ll quote both options and let you decide. Our job is to give you the honest answer, not to sell you a repair that won’t last. Call (432) 249-5492 for a written price before any work starts.
Our Ghost Controls Service Process - Step by Step
- 1
Diagnosis on site. We check the Ghost Controls operator’s power supply, board LEDs, limit switch state, capacitor health, and chain or belt tension before touching anything. On AXS units, we test the reed switch assembly directly. On HY units, we inspect the enclosure for moisture and check hydraulic fluid level and condition.
- 2
Written price, agreed before work. Victor’s rule is simple: tell you what it needs, tell you what it costs, and don’t turn a bolt until you approve it. Your price is settled before the repair begins.
- 3
Repair or replacement. We install OEM boards, motors, and sensors where it matters, and quality aftermarket wear parts where it doesn’t. We re-level posts that have heaved out of alignment, re-tension chains, and reset travel limits and stop force to Ghost Controls factory ranges.
- 4
Testing under load. We cycle the gate 10 to 15 times, testing the auto-reverse, the safety sensors, the manual release, and the keypad. We don’t leave until it closes fully, quietly, and safely from every input.
- 5
90-Day Done Right Promise. Every Ghost Controls repair leaves with our written guarantee. If anything we touched fails within 90 days, we return and make it right. No arguing, no paperwork, no exceptions.
Ghost Controls Products We Service & Install in Wylie
We service and install the full Ghost Controls residential lineup in Wylie: the AXS Series swing gate opener, the HY Series hydraulic swing opener, the DS Series slide gate opener, and the AXP Series pedestrian gate opener. We also work on the Ghost Controls remote receivers, keypads, and vehicle sensors that pair with those units. Our trucks carry the common failure parts for each series: AXS reed switches and motor capacitors, HY board enclosures and drip-loop hardware, DS chain tensioners and sprockets, and AXP limit actuators. Motor repair, gate realignment, and battery backup upgrades are the three Ghost Controls jobs we perform most often in Wylie.
We Also Service These Brands
Ghost Controls is a brand we know deeply, but it isn’t the only operator on Wylie driveways. We also carry parts and Gate Repair experience for LiftMaster, Mighty Mule, DoorKing, FAAC, BFT, Linear, Viking, and Elite. If your gate has a different nameplate than you expected, chances are good we still have the right fix on the truck.
FAQs - Ghost Controls Gate Repair Service in Wylie
No. We are an independent Ghost Controls service provider, not a factory-authorized dealer. That independence means we can use the right mix of OEM and aftermarket parts for your budget, and we don’t answer to a manufacturer’s script when we diagnose your gate. What we do answer to is our 90-Day Done Right Promise, in writing, on every Ghost Controls repair in Wylie.
Yes, for control boards, motors, and safety sensors, we use genuine Ghost Controls OEM parts to preserve factory timing, force settings, and sensitivity. For routine wear parts like chains, pulleys, belts, and hinges, we use high-grade aftermarket parts that meet or exceed the OEM spec. That approach keeps your repair affordable where it doesn’t matter and precise where it does.
Most Ghost Controls repairs are completed in a single visit. A typical AXS limit switch replacement or DS chain re-tensioning takes about one to two hours on site. Board replacements and hydraulic service may take longer if we need to run new wiring or address moisture damage. We will give you a time estimate with your written quote so you know what to expect before we start.
We service the Ghost Controls AXS Series swing opener, HY Series hydraulic swing opener, DS Series slide opener, and AXP Series pedestrian opener, along with their paired keypads, receivers, and vehicle sensors. If your unit is older and the label is faded, we can identify it from the board configuration and motor housing. Call (432) 249-5492 and describe what it’s doing wrong. We’ll tell you what it likely needs.
If your Ghost Controls unit is still under factory warranty, we recommend checking your warranty terms. Using an independent service provider does not automatically void a Ghost Controls warranty, but some warranty claims require factory-authorized diagnosis. We are upfront about this before we start any work, and we’ll help you understand what your warranty will and won’t cover so there are no surprises. For units out of warranty, which is most of what we see in Wylie, our 90-Day Done Right Promise covers the repairs we perform.
Ghost Controls gate repair in Wylie typically runs $150 to $300 for common fixes like limit switch replacement or chain tensioning, $300 to $600 for board replacements or motor capacitor work, and $600 to $1,100 for full motor replacement or hydraulic pump service, depending on the model and the condition of the gate itself. Every quote is written and agreed before any work starts, and estimates are free. Call (432) 249-5492 for an exact price on your unit.
That hesitation is usually the motor capacitor starting to degrade, or the reed switch assembly sending a weak position signal to the board. On Wylie’s hot afternoons, both parts are under extra stress. We test the capacitor’s microfarad reading and the reed switch continuity on site, and replace whichever is failing. It’s a one-visit fix for most AXS units.
It depends on how high the water reached and how long it sat. If the motor and board stayed dry, a flooded DS series opener can often be saved with a thorough drying, terminal cleaning, and chain re-lubrication. If water reached the board enclosure, we usually replace the board and rewire the incoming power with proper drip loops. Higher water that submerged the motor usually means replacement. We’ll tell you which path applies to your unit after a physical inspection.
Low fluid makes the gate move slowly, especially in cold weather, and you may hear a whining sound as the pump cavitates. A failing pump makes a grinding or knocking sound and the gate moves erratically even with fluid full. We check the fluid level, color, and smell first, then test the pump’s pressure. Most Wylie HY units we see just need a top-up and fresh seals, not a new pump.
On Wylie installs, intermittent keypads are usually a wire connection issue at the control board, not the keypad itself. Heat expansion loosens a terminal or a wire splice, and the signal drops randomly through the day. We re-seat and re-torque every board connection, then test the keypad under load. If the keypad is genuinely failing, we replace it with a Ghost Controls-compatible unit.
Yes. Ghost Controls slide openers can be paired with a compatible battery backup, and we install them regularly in Wylie, especially on the eastern side near Murphy, TX and Lake Lavon where storm-related power outages are common. The backup keeps the gate operational during an outage so you can still enter and exit. We’ll match the battery size to your operator’s draw and install it with the proper charging circuit.
Book Your Ghost Controls Service in Wylie, TX
If your Ghost Controls opener is acting up in Wylie, call (432) 249-5492. A live person answers, day or night. We’ll schedule a diagnosis, quote a written price before any work begins, and stand behind the repair with our 90-Day Done Right Promise. Victor and the Ironworks Gate Co. team have been fixing gates across Collin County for over 42 years, and we plan to be here for the next forty too.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Wylie since 1984.