Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Installation for Wylie Homeowners
A new driveway gate in Wylie typically costs between $3,800 and $12,500 installed, depending on the gate style, automation package, and driveway width. That price should include the posts set in concrete, the gate hung square, the opener wired, and a written guarantee on the whole job. At Ironworks Gate Co., we’ve been installing driveway and pedestrian gates since 1984, and every our Gate Installation in Wylie carries our 90-Day Done Right Promise in writing.
Victor Salinas founded this company on a simple idea: build the gate so it works like it’s supposed to, stand behind it, and answer the phone when a homeowner calls. That’s why a live person answers our line at (432) 249-5492 24 hours a day, seven days a week. Not a voicemail tree. Not an answering service. When your gate won’t close or you’re ready to replace the old one, you’ll talk to someone who can help, day or night.
We work exclusively on gates. Not fences on Tuesday and gates on Friday. Every weld, hinge, motor, and keypad we touch is a gate. That focus matters for Wylie homeowners who’ve been let down by generalist contractors before. You call once, we do it right, and the written guarantee means you never have to think about it again.
What Our Gate Installation Service Includes
Gate installation means more than hanging a panel between two posts. A proper installation starts with the driveway itself: its slope, its width, the soil underneath, and the way water moves across it. Then we build the post foundations, set the gate, install and program the automation, and test the safety edges and photo eyes until everything works together. Here’s how that applies to each type of gate we install in Wylie.
Driveway Gate Installation
A driveway gate is the full package: gate panel, posts, hinges, operator, and access system, all built to handle daily use for years, and we consider it the Best Gate Installation in Wylie, TX when done right. In Wylie, most driveway gates are installed on concrete or asphalt driveways with slight slopes, so the panel needs to clear the ground at every point of its travel. We measure the driveway in person, factor in the grade and drainage, and build the opening so the gate moves without dragging or binding. Our installers weld on-site when the job calls for it, so custom widths and odd angles don’t send us back to a shop.
Pedestrian Gate Installation
A pedestrian gate is a smaller walk-through gate, often set beside the driveway entrance or within a fence line. Wylie homeowners add these for daily convenience, so no one has to open the big driveway gate just to grab the mail or walk the dog. We hang pedestrian gates on heavy-duty hinges rated for their full weight, and we set the latch with the same care as the main gate. The finished gate swings true and latches without slamming, and it’s covered by the same 90-Day Done Right Promise as everything else.
Sliding Gate Installation
A sliding gate travels horizontally along the fence line instead of swinging out into the driveway. That makes it the right choice for Wylie homes with sloped driveways or limited space in front of the gate. We install the track and roller system level and straight, then mount the operator and set the travel limits so the gate stops precisely every time. Because sliding gates carry all their weight on the track and rollers, the foundation and rail alignment are where the job actually succeeds or fails, and that’s where our 42 years of experience shows.
Swing Gate Installation
A swing gate pivots on hinges, either as a single leaf or a pair of leaves meeting in the center. It’s the most traditional look, and it’s still the most common choice for Wylie driveways. We set the posts deep in concrete, mount the hinges at the correct height, and adjust the operator’s force settings so the gate opens smoothly without straining the motor. Swing gates need proper weight distribution across the hinge line, and we’ve hung enough of them to know exactly where a gate will sag over time and how to build against it.
Double Gate Installation
A double gate, also called a bi-parting gate, uses two leaves that swing or slide apart from the center. It’s the standard choice for wider Wylie driveways, typically anything over twelve feet. We build both leaves to match, mount a center stop, and sync the operators so both sides move together and close completely every cycle. If one leaf gets out of time, the gate won’t close, so we test the full open-close cycle repeatedly before we leave and calibrate the limit switches to within a fraction of an inch.
Security Gate Installation
A security gate is a gate built to control who gets in, not just mark the property line. Wylie homeowners on acreage, or anyone with a long driveway, often want a sturdier steel frame, anti-climb features, and access control like a keypad or telephone entry system. We build these gates with reinforced posts and heavier welding, then integrate the access control so visitors can be screened and the gate opened from the house or from a phone. The goal is simple: the gate opens for you and the people you trust, and stays closed for everyone else.
Every installation, from a simple pedestrian gate to a full automated security gate, includes cleanup, a walkthrough, and programming of every opener and keypad before we consider the job done.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Installation
We install and program gate operators from the brands Wylie homeowners already trust. Our technicians are factory-trained on LiftMaster and FAAC equipment, and we keep their common parts on the truck so an installation isn’t delayed waiting on a shipment. LiftMaster remains the most common choice for residential swing and slide gates in this area because of its reliability and parts availability. FAAC equipment shows up often on estate properties, where a heavier hydraulic operator is needed for a long or solid gate panel.
We also work regularly with BFT and Linear operators, both solid mid-range options for standard residential gates. Each brand has its own programming sequence, its own force-sensing calibration, and its own safety-eye wiring requirements. We don’t read the manual on your driveway. We know these systems because we’ve installed and serviced hundreds of them across Wylie, Murphy, and Lavon over the years, including Gate Installation in Sachse. Whether your gate has a LiftMaster arm, a FAAC piston, a BFT slide motor, or any other make, we can install it, program it, and stand behind it in writing.
Signs You Need Gate Installation Right Now
Some gates can be repaired. Others have reached the point where putting more money into them is the wrong call. Here’s what Wylie homeowners should look for when deciding between repair and replacement.
- The gate post is leaning or cracked at the base. This is the most common failure we see, and it happens when the original post was set too shallow or in soil that shifts with the Texas clay. A leaning post will only get worse, and it’s usually a sign the foundation isn’t adequate for the gate’s weight.
- The gate sags and drags on the driveway. Gates drag when the hinges wear, the frame flexes, or the door itself was never built for the span. If you’re lifting the gate by hand to get it to latch, the structural integrity is gone. A new installation with properly sized steel stops the problem permanently.
- The opener struggles, buzzes, or overheats. A motor that’s working harder than it should is fighting a gate that’s out of balance or binding. You can replace the opener, but if the gate itself is the problem, the new opener will fail the same way. We’ll tell you honestly which one needs to be replaced.
- The gate is more than 20 years old and repairs are stacking up. One repair every few years is normal maintenance. Multiple repairs in a single season means the gate has reached the end of its service life. A new installation costs more up front, but it stops the repeated service calls. We’ll show you the math before you spend another dollar on the old gate.
- You want automation, but the current gate was never built for it. Thin-walled tubing, weak hinges, and under-sized posts won’t hold up to the stress of an operator. We see this on older Wylie properties where a manual gate was hung decades ago. Adding an opener requires a gate that’s structurally sound, or the motor will tear it apart within a year.
If any of these sound familiar, call (432) 249-5492 and we’ll come look. The second opinion is free, and we’ll tell you plainly whether the gate should be repaired or replaced. No pressure either way.
Our Gate Installation Process - Step by Step
We’ve been doing this long enough to know that homeowners want to understand what’s going to happen before we show up. Here’s exactly how a typical gate installation works with Ironworks Gate Co. in Wylie.
- 1
Site measure and estimate. We come to your property, measure the driveway width, check the grade, locate utilities, and talk through what you want the gate to do. You get a written estimate with a line-item price. The price we agree on is the price you pay. No surprises on the bill, ever.
- 2
Foundation and post setting. On installation day, we dig the post holes to the depth the gate’s weight requires, set the posts in concrete, and brace them plumb. For automated gates, we also trench for the low-voltage wiring and the power run. This is the step that determines whether the gate works for ten years or starts leaning in five, so we take our time here.
- 3
Gate fabrication and hanging. Some gates are pre-fabricated to your measurements, and some we weld on-site. Either way, we hang the panel on heavy-duty hinges or the slide track, check the clearance at every point of travel, and adjust until the gate moves freely with one hand.
- 4
Operator installation and programming. The opener gets mounted, wired, and set with the correct force limits for the gate’s weight and length. We program every remote, keypad, and access control device, and we set the travel limits precisely in both directions. Then we test the safety edges and photo eyes so the gate reverses properly if it meets resistance or an obstruction.
- 5
Final walkthrough and written guarantee. We run the gate through full open-close cycles, show you how everything works, and walk the property with you to make sure nothing was left behind. Then we give you the paperwork for the 90-Day Done Right Promise. If anything isn’t right, we come back and make it right. No arguing, no forms, no exceptions.
The whole process, start to finish, usually happens in a single day for standard driveway gates. Custom security gates or larger estate entrances may take longer, and we’ll tell you the timeline before we schedule anything.
How Much Does Gate Installation Cost in Wylie?
The cost of gate installation in Wylie depends on the gate type, the width of the opening, the operator package, and the condition of the ground. Here’s what local homeowners can expect based on recent jobs we’ve completed in the area.
- Pedestrian gate: $900 to $2,800 installed, depending on material and latch hardware
- Single swing driveway gate (manual): $2,400 to $5,500 installed
- Single swing driveway gate (automated): $3,800 to $8,200 installed including operator and controls
- Double swing or sliding gate (automated): $6,000 to $14,500 installed depending on width, material, and operator type
- Security gate with access control: $8,000 to $18,000+ for custom steel with keypad or telephone entry
The biggest factors in price are the gate’s width and weight, the automation system you choose, and whether the soil requires deeper than standard footings. Wylie’s clay-heavy soil holds moisture and expands and contracts with the seasons, so we dig post holes on the deeper side and use a concrete mix suited to that movement. That costs a little more up front and prevents a leaning gate later.
A free estimate from Ironworks Gate Co. includes the full line-item breakdown: gate, posts, concrete, operator, controls, wiring, and labor. We’ll also point out anything on the property that affects the price, like a long power run from the house to the gate. The estimate is free, it’s written, and the price we quote is the price you pay. Call (432) 249-5492 to schedule a measure. If you have a written estimate from another company, bring it to us and we’ll give you a free second opinion. We may not be the lowest bid, but Wylie homeowners call us because they want the last gate they’ll ever have to think about.
Gate Installation Near Wylie - Our Service Area
Ironworks Gate Co. serves Wylie and the surrounding communities throughout Collin County and beyond. We regularly install gates in Murphy, Lavon, Sachse, Lucas, Parker, Rowlett, Fairview, Rockwall, Fate, Princeton, and Allen. Most Wylie installations are scheduled within a few days of your call, and we arrive when we say we will. If you’re considering a new gate for your home, start with our home page to see everything we do, or call the shop directly and talk to a live person, 24 hours a day.
Serving Wylie, TX - Our Local Coverage Area
We’re based in the Wylie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Installation in Wylie
Gate installation is the process of setting gate posts, hanging the gate panel, installing and programming an opener if the gate is automated, and connecting any access controls like keypads or remote receivers. It includes the concrete footings, the hinge or track hardware, the electrical wiring, and the final testing of every safety feature. At Ironworks Gate Co., every installation ends with a written 90-Day Done Right Promise. Call (432) 249-5492 and we’ll measure your driveway and give you a free written estimate.
Most standard driveway gate installations in Wylie are completed in one day, including post setting, gate hanging, and operator programming. Larger double gates, custom security gates, or jobs that require a long electrical trench may take two days. We’ll give you a clear timeline before we schedule the work, and we arrive when we say we will.
A pedestrian gate in Wylie typically runs $900 to $2,800, while a full automated driveway gate runs $3,800 to $12,500 depending on width, material, and operator package. Our estimates are free and written, with a line-item breakdown so you see exactly where the money goes. The price we quote before work starts is the price you pay when it’s done.
Yes, we install and program LiftMaster gate openers regularly in Wylie, and our technicians carry common LiftMaster parts on the truck. We’re also factory-trained on FAAC, BFT, and Linear equipment, so the opener gets installed correctly the first time. If you already have a brand preference, tell us when you call and we’ll quote the job with that opener in the estimate.
Gate installation is measured, ordered, and scheduled, so same-day installation isn’t something we can promise. But we can often come out the same day to measure and provide a written estimate, and most standard installations are scheduled within a few days. If you have a gate emergency, like a gate that won’t close or is stuck open, call us immediately for Emergency Gate Installation in Wylie, TX.
Every gate installation we complete is protected by our 90-Day Done Right Promise in writing. If something isn’t right within those 90 days, we come back and make it right. No paperwork, no arguing, no exceptions. That guarantee applies to the full scope of the job: the posts, the gate, the operator, and the access controls. Call (432) 249-5492 for details.
Clear the area around the gate and driveway so our team can work without obstruction, and make sure any pets are secured inside or in the backyard. If you have a preferred gate style or material, having reference photos ready helps us quote accurately. If the gate will be automated, let us know where your electrical panel is located and whether you’d like the power run buried or surfaced.
Schedule Your Gate Installation Service in Wylie Today
A new gate done right should be the last one you ever buy for that driveway. Call (432) 249-5492 and we’ll schedule a free on-site measure, give you a written estimate with a firm price, and install the gate on the day we say we will. A live person answers 24 hours a day, seven days a week. Victor Salinas and the Ironworks Gate Co. team have been serving Wylie since 1984, and we plan to be here another forty years. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Wylie since 1984.