Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Murphy, TX
Murphy homeowners call us most often for one reason: a gate that used to close square and now drags, binds, or will not latch. Most gate repairs in Murphy run from $180 to $340 for common fixes like hinge replacement, post re-plumbing, or limit-switch adjustment, and we complete most jobs in a single visit. If your gate is sagging, grinding, or refusing to open, call (432) 249-5492 and a live person answers, day or night.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Murphy Homeowners Choose Ironworks Gate Co.
We have been fixing gates for over 42 years, and the work in Murphy follows patterns we know well. Maxwell Creek, Rolling Ridge, Parkside, and Hunters Landing all have gates that were installed within a few years of each other, which means we see the same hinge failures, the same operator boards, and the same post heave across whole streets. Homeowners here tend to keep their homes for decades, and they notice when a repair does not hold. Our response is the same on the 400th job as the first: background-checked, uniformed technicians, an upfront price agreed before any bolt is turned, and a written 90-Day Done Right Promise on every completed job.
Victor Salinas leads our crews, and he built Ironworks Gate Co. on a square deal. If a gate is not right within 90 days, we come back and make it right. No paperwork, no arguing, no exceptions. That is the Keystone Standard, and it applies to every gate we touch in Murphy, Texas.
Gate Repair Services We Offer in Murphy
Gate Repair
We repair sagging wooden privacy gates, misaligned ornamental iron driveway gates, broken hinges, failed latches, and bent or cracked posts. Murphy’s clay soil works against gate posts constantly, so we re-plumb posts, weld cracked frames, and set hardware so the gate closes true again.
Learn more about our Gate Repair in Murphy.
Gate Installation
Whether you are replacing a builder-grade fence gate with cedar that will last or adding an ornamental iron driveway gate, we measure, fabricate, and hang it to match your HOA’s material and finish requirements. Every installation includes a written price before work begins.
Learn more about our Gate Installation in Murphy.
Gate Motor & Opener
We service and replace automatic gate operators on nine major brands, including Ghost Controls, DoorKing, and Elite. If your opener grinds, stops mid-travel, or will not respond to the remote, we diagnose it and fix it correctly on the first visit.
Learn more about our Gate Motor & Opener in Murphy.
Gate Access Control
Keypads, intercoms, vehicle sensors, and safety edges all fail over time, especially through Texas summers. We wire, program, and test access control so your gate opens for you and stays closed for everyone else.
Gate Parts & Welding
Some repairs need a replacement hinge or bracket. Some need a welder. We do both in-house, including custom fabrication for HOA-matched hardware that is not on a shelf anywhere.
Neighborhoods We Serve in Murphy
Our crews work throughout Murphy weekly. Typical response time for non-emergency repairs is the same day or next morning. We regularly serve:
- Maxwell Creek
- Rolling Ridge
- Parkside
- Hunters Landing
- Timbers Estates
Why Murphy’s Climate & Housing Affect Gate Repair
Murphy’s housing stock was built out almost entirely between roughly 2000 and 2015, which means a large cohort of builder-grade cedar fence gates and ornamental iron driveway gates are now aging on the same timeline. Whole neighborhoods share the same original hardware, the same production-builder frames, and the same failure modes. When one gate on a street starts sagging, its neighbors are usually not far behind.
The bigger issue is the ground under those gates. Murphy sits on Blackland Prairie clay, which shrinks and cracks during North Texas summer droughts, then swells after fall and winter rains. That cycle heaves posts out of plumb year after year. A gate that closed perfectly in May binds by September, not because the hinges failed, but because the post moved. We see this in every subdivision from Murphy Road down to Betsy Lane, and it is the single biggest reason automatic openers in Murphy trip, grind, and burn out motors prematurely.
Pricing for Gate Repair in Murphy
Most Murphy gate repairs fall into these ranges, quoted and agreed before work starts:
- Hinge or latch replacement: $180 - $280
- Post re-plumbing and reset: $240 - $400 depending on post size and concrete condition
- Welded frame repair: $220 - $380
- Opener limit or safety-edge adjustment: $170 - $260
- Full gate re-hang with new hardware: $350 - $650
Every quote is fixed before we begin. No surprises on the bill. We also honor a $50 discount on any repair over $250, a free second opinion on any written estimate, and a permanent 5% discount for seniors and veterans.
Service Area - Cities Near Murphy
Ironworks Gate Co. serves Murphy and the surrounding Collin County communities. If you live just outside Murphy, we also provide gate repair in Wylie, Lavon, Sachse, and Lucas.
Serving Murphy, TX - Our Local Coverage Area
We’re based in the Murphy area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Murphy
Most gate repairs in Murphy cost between $180 and $340, with post re-planting and welded frame repairs running higher depending on scope. You will get a fixed price before we start, never after. Call (432) 249-5492 for an exact quote.
In most cases, yes. Hinge, latch, and operator adjustments are typically completed in a single visit the same day or next morning. If your gate is stuck open and your yard is unsecured, call (432) 249-5492 and a live person will schedule the soonest available crew.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your opener is one of those, we have the training and the parts to fix it correctly on the first visit.
Yes. Many Murphy HOA communities specify matching fence and gate materials, paint colors, and hardware finishes. We source or fabricate HOA-compliant replacements rather than using an off-the-shelf substitute, so the repair passes inspection the first time.
Every completed job is covered by our written 90-Day Done Right Promise. If the gate is not right, we come back and make it right. No paperwork, no arguing, no exceptions.
If your gate is sagging, binding, or will not open, call (432) 249-5492 for a free estimate. A live person answers 24 hours a day, 7 days a week. We will be there when we say.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Murphy and the surrounding Collin County communities for over 42 years.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Murphy Customers Say
"The photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that a sprinkler head was spraying it every morning, which is why it kept happening."
- Jamal Dawson"Used them at two properties now. Both times they diagnosed it on the first visit instead of guessing and coming back."
- Rohan Shah"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Eric Padgett