Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Parker
Most gate repair calls in Parker come down to two things: a wide gate that no longer swings or slides true, and an operator that’s working too hard against it. We fix both, and we fix them fast. A typical automatic gate repair in Parker runs $190-$480, and a hinge or post reset on a 16-20 ft farm-style gate runs $350-$900 depending on how far the Blackland clay has moved the post. Ironworks Gate Co. has served Parker homeowners for over 42 years, and a live person answers our phone 24 hours a day, 7 days a week. Call (432) 249-5492 and we’ll get a technician to your driveway, usually the same day.
Why Ironworks Gate Co. Is Parker’s Preferred Gate Repair Company
Parker is not like the surrounding suburbs. The one-acre minimum zoning and citywide allowance for horse-keeping means almost every property on Parker Road, McCreary Road, and Ballard Road has a wide driveway entrance built for trailers, not sedans. We know what that means for gate hardware: heavier posts, longer leaves, bigger operators, and more stress on every hinge point. When a Parker homeowner calls us, they’re not asking for a generic repair. They’re asking for someone who understands what an 18-foot gate does to its own post footing after ten years of Collin County wet-dry cycles.
Our technicians arrive in uniform, background-checked, and they work the way they’d work on their own mother’s driveway. We don’t send a handyman to guess. We send a gate specialist who can weld, wire, and calibrate. Reviews from Parker customers consistently mention two things: we show up when we say, and the gate works when we leave. Our Gate Repair team carries reinforcement brackets, heavy-duty hinge hardware, and operator parts sized for the gates we actually see in Parker, not just what fits a standard suburban swing gate.
Victor Salinas leads the team, and the standard he sets is simple: the 400th job gets the same care as the first. That’s what the 90-Day Done Right Promise means in practice. If a repair isn’t holding, we come back and make it right. In writing, no arguing, no paperwork.
Our Gate Repair Services in Parker
Electric Gate Repair
Electric gate repair in Parker typically runs $190-$480 for operator diagnosis, board replacement, limit switch calibration, or wiring repair. Most of the electric gate failures we see on Parker’s acreage properties trace back to two things: aged LiftMaster and Apollo operators from the 1980s-2000s build era, and ice storm damage to exposed circuit boards. We service all nine major automation brands, including Ghost Controls, DoorKing, and Elite, so the correct fix happens on the first visit, not the third.
Automatic Gate Repair
Automatic gate repair in Parker usually costs $220-$650, depending on whether we’re repairing the operator, the rack and pinion, the safety loops, or the gate itself. On long driveways where Parker homeowners run horse trailers daily, an automatic gate takes punishment that a standard residential opener never sees. If your gate opens partway, reverses for no reason, or grinds through every cycle, that’s the gate telling you the operator is fighting something. We find out what, and we fix the cause, not the symptom.
Hinge & Post Repair
Hinge and post repair is the most common heavy repair we perform in Parker, and prices typically run $350-$900. The Blackland Prairie expansive clay under Parker swells in wet winters and contracts in dry summers. That movement heaves post footings, and a heaved post throws both leaves of a wide swing gate out of plane. We reset the post, install a reinforced hinge post bracket where it’s needed, and realign the leaves so the gate closes square and the hinges stop carrying load they were never designed to bear.
Gate Realignment
Gate realignment in Parker runs $150-$400 when the post is still solid and the gate simply needs mechanical adjustment. On big dual swing gates sized for horse trailers, even a half-inch of sag at the latch side turns into a gate that binds, drags, or won’t latch at all. We realign the rack and pinion on slide gates, adjust hinge spacing on swing gates, and recalibrate operator limits so the gate closes cleanly without slamming or stalling.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Parker
We’re factory-trained and equipped on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Parker, that matters more than people realize. When a Ghost Controls board fails on a solar-powered gate at the back of a five-acre lot, or a DoorKing slide operator strips a gear on an 18-foot farm gate, we don’t order parts and wait. We run a service vehicle stocked with common boards, gears, hinges, and safety components, so most jobs are completed in one visit. The parts you need for a 20-foot dual swing gate aren’t on the shelf at a big-box store. They’re on our truck.
Common Gate Repair Problems We See in Parker Homes
- Post heave from Blackland Prairie clay. Parker’s expansive soil swells and shrinks with every wet winter and dry summer. Over time, hinge posts shift, swing gates sag, and the operator starts working against the misalignment until something breaks. This is the number-one repair call in Parker, and it requires mechanical correction before any electrical work makes sense.
- Worn rack and pinion gears on wide slide gates. Parker’s 16-20 ft slide gates run on gears and tracks that standard residential suppliers don’t stock. When an aging LiftMaster or Apollo operator grinds through a cycle, the gear is usually worn past service. We source and install the correct heavy-duty components, then set the limits so the gate stops without slamming.
- Ice storm damage to operator boards and wiring. Collin County gets ice storms that Dallas proper often misses. Exposed circuit boards, photocells, and wiring on gate operators take the brunt. After a hard freeze, we see intermittent failures, dead keypads, and operators that work one day and lock up the next.
- Undersized operators on horse-trailer gates. A lot of Parker gates were hung decades ago, and some operators installed back then were never rated for a 16-20 ft leaf moving in wind and clay-shifted soil. We replace undersized operators with properly rated units, so the gate doesn’t burn through boards and gears every few seasons.
Pricing for Gate Repair in Parker, TX
Gate repair in Parker is priced by the job, not the hour, and every price is quoted and agreed before a single bolt is turned. You’ll know the number before we start work. A simple gate realignment or limit switch adjustment typically runs $150-$400. Replacing an operator board or wiring repair on an automatic gate runs $190-$480. A full operator replacement on a heavy slide or swing gate runs $850-$1,800 depending on the brand and weight rating required. A hinge post reset with bracket reinforcement, the job that saves a sagging Parker swing gate, runs $350-$900. Every estimate is free, and every completed job is covered by our 90-Day Done Right Promise, in writing. Call (432) 249-5492 for an exact quote on your gate.
We Also Serve Cities Near Parker
Ironworks Gate Co. serves Gate Repair in Parker and the surrounding communities: Wylie, Murphy, Lavon, and Sachse. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, and crews are staged locally across the area for quick response. If you’re just outside Parker, call us. We’ll get you on the schedule without sending you to a call center.
Serving Parker, TX - Our Local Coverage Area
We’re based in the Parker area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Parker
Your hinge post is moving. Parker sits on Blackland Prairie expansive clay, and that soil swells with wet winters and contracts during dry summers. Over years, the post footing shifts and the post leans, which makes the gate sag no matter how many times you adjust the hinge bolts. The permanent fix is a post reset and reinforced hinge post bracket, which runs $350-$900 in Parker. We realign the leaves, then set the operator limits so the gate closes square. Call (432) 249-5492 and we’ll come take a look, free estimate included.
Yes. Solar-powered gate operators are a practical solution for Parker’s long driveways and acreage entrances where running mains power to the gate is impractical or expensive. We install and service solar operators from Ghost Controls, Elite, and Mighty Mule, sized for the wide gates common in Parker. The key is matching the panel and battery bank to the operator’s duty cycle and the gate’s weight. We handle that sizing and installation. Call (432) 249-5492 for a free on-site assessment.
That grinding is almost always a worn rack and pinion gear set, especially on the 16-20 ft slide gates common on Parker’s horse properties. The operator motor is still running, but the gears have stripped or are slipping, so the gate creeps instead of slides. Continuing to run it will damage the operator further. Repair typically runs $220-$650 depending on the gear set and operator model. We carry the heavy-duty gears that standard suppliers don’t stock. Call (432) 249-5492 for a same-day diagnosis.
Prioritize your hinge posts and operator weight rating. Parker’s one-acre minimum zoning and horse-keeping allowance mean your gate was likely built wide enough for a horse trailer, but the hardware may not be rated for daily use. A sagging hinge post stresses everything else: hinges, latch, operator, and the gate leaf itself. We recommend a hinge post inspection and operator weight-rating check before anything fails on a cold morning when you need to get the trailer out. Inspection is part of a free estimate. Call (432) 249-5492.
Ice storms in Collin County expose gate operator circuit boards, photocells, and wiring to freezing moisture and thermal stress, which causes intermittent failures that show up days or weeks after the thaw. If your gate works one day and locks up the next, the damage is probably water intrusion or a cracked solder joint on a board. We replace boards, seal connection housings, and reroute exposed wiring so the next ice storm doesn’t put you back in the same spot. Repair typically runs $190-$480. Call (432) 249-5492 and we’ll get it sorted.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Parker with specialized gate repair since 1984.