Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterElite Gate Installation in Wylie: What to Know First
Elite gate installation in Wylie typically runs between $2,400 and $9,500 depending on whether we’re hanging a single swing gate or a full double driveway gate with automation. We’re an independent Elite service provider, not a factory-authorized dealer, which means we answer to you and the work we leave behind, not a manufacturer’s sales quota. Most Elite installations we take on in Wylie are completed within one to two days once materials arrive, and every job carries our written 90-Day Done Right Promise.
This page is for Wylie homeowners who already have Elite equipment or are considering it, and want to know what real installation involves, what it costs here, and what goes wrong when corners get cut. Victor Salinas has been working on gates across Collin County for the better part of three decades, and he’s repaired enough half-installed Elite jobs to know exactly what a proper installation looks like. If you’d rather talk than read, call (432) 249-5492 and a live person will answer.
Key Takeaways
- We install, weld, and automate Elite slide and swing gates across Wylie, including retrofits of older Elite mechanical gates.
- Upfront pricing, quoted and agreed before any work starts. No surprises on the bill.
- Most Elite installs finish in one to two days on site.
- We service eight other automation brands, so if your old opener is a LiftMaster and you want an Elite gate, we handle both ends of the swap.
- Every Elite installation is covered by the 90-Day Done Right Promise, in writing.
How Elite Products Fail and How We Fix Them
Elite builds solid mechanical gates. The failures we see in Wylie are rarely the steel itself. They are almost always in the installation details: how the posts were set, how the gate was hung, how the operator was wired, and whether anyone accounted for our Blackland Prairie clay soil. Here are the five failure patterns we see most on Elite gates in this area.
- Elite SL3000 and SL3000 series slide gates binding after a season or two. Wylie’s clay soil expands and contracts through wet winters and dry summers. Posts set shallow, or set without enough concrete depth, shift with the soil. The gate starts dragging, the rollers wear unevenly, and the operator strains until a limit switch burns out. Our fix starts with checking post depth and level before we mount anything. When we set posts, we go below the freeze line and account for soil movement, then shim and true the track so the gate rolls square with the operator’s torque spec, not against it.
- Elite CSW200 swing operators stripped at the crank arm on double gates. We see this on homes built in the 1990s and early 2000s where the second leaf of a double gate was hung without a proper stop, so every close cycle slams the leaf into the other. That impact transmits through the crank arm and strips the hub on the operator shaft. A new operator won’t fix it. The leaf has to come down, the hinges need re-sleeving, and the center stop needs rebuilding before the new operator goes on. This is the exact repair we do that keeps an old Elite gate running like the day it was hung.
- Elite EC series keypads and photo eyes wired with dry, brittle splices. Low-voltage wiring buried without conduit, spliced with wire nuts and left exposed, fails in North Texas heat within three to five years. The insulation cracks, moisture gets in, and the keypad goes dead or the gate refuses to close. On an install, we run all low-voltage in direct-burial rated cable inside conduit, and we make every splice in a weatherproof junction box, not in the dirt.
- Undersized operators on heavy-duty Elite driveway gates. A wrought-iron Elite double gate is heavy. When a previous installer hung a light-duty residential motor on a commercial-weight gate, the operator’s duty cycle gets exceeded constantly. It overheats, the thermal breaker trips, and the homeowner is told they need a new motor every few years. We match the operator’s duty cycle and torque rating to the true weight and cycle count of the installed gate, not the listing on the box.
- Aftermarket boards in Elite operators failing prematurely. The original SL and CSW boards are robust but pricey. We have opened countless Elite cabinets to find generic aftermarket control boards wired in but missing the soft-start and obstacle-sensing logic the Elite motor was designed around. The motor hammers on every start and stop, and a year later the gearbox is shot. We use OEM boards on Elite operators when they are available, and when the OEM part is discontinued, we use quality aftermarket with compatible logic, never a bare-bones universal board that ignores the motor’s feedback harness.
Our Elite Gate Installation Process
Every Elite job starts with a phone call and ends with a gate that closes the way it should. Here is how a typical installation runs with us.
- 1
You call, a person answers. That is me, Victor, or one of our team. We ask what the gate is doing wrong and what equipment you have. Tell me what it’s doing wrong, and I’ll tell you what it actually needs. Then we schedule a time to come look.
- 2
We inspect the existing posts, gate, and operator. In Wylie, the question is always what the soil has done to the posts over twenty years. We check level, plumb, roller wear, hinge wear, and whether the operator is matched to the gate weight.
- 3
We write a fixed price before any work starts. Parts, labor, and any welding or concrete work are all in the number. You approve it. Nothing gets added later.
- 4
We do the work. Posts set and cured, gate hung and leveled, operator mounted and wired, photo eyes and safety edges tested through full open and close cycles.
- 5
We test the safety loops and obstruction reversal in front of you. A gate is a moving piece of steel. It has to stop when it meets resistance, every time, no exceptions.
- 6
We walk the finished job with you and leave the area cleaner than we found it. Then our 90-Day Done Right Promise is yours in writing.
What Elite Gate Installation Costs in Wylie
Here is honest pricing for the Elite jobs we do most often in Wylie. Every number is quoted and agreed before any work starts.
- Single swing gate, manual, no automation: $1,800 – $3,200
- Single swing gate with Elite CSW200 operator: $3,400 – $5,000
- Double swing gate with Elite CSW200UL operator, full automation: $5,500 – $8,000
- Slide gate, Elite SL3000, including track and roller rebuild where needed: $4,500 – $7,500
- Full double driveway slide gate with operator, keypad, and photo eyes: $6,500 – $9,500
- Elite operator retrofit on an existing, sound gate: $1,400 – $2,600
The price moves based on gate weight, post condition, whether new concrete is needed, and how much welding the frame requires. A gate that was hung square and just needs a new operator is a half-day job. A gate with rotted posts and a twisted frame is a two-day job. Call (432) 249-5492 and we will give you a fixed number in writing before you commit to anything.
Why Wylie Homeowners Call Ironworks Gate Co. for Elite Work
We have been doing this in Wylie and across Collin County for over 42 years, founded in 1984. That matters because a gate installer who did a job here in 1998 is still here to answer for it now. We are not a one-truck operation that changes names every spring. We are the company Wylie homeowners call when the last crew left a gate half-hung and stopped answering the phone.
We are trained and equipped on nine gate-automation brands, including Elite, LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Mighty Mule. That matters when you need a new Elite gate hung but your operator is an older LiftMaster, or your keypad is a DoorKing and you want it to talk to an Elite board. Most jobs are done in a single visit. Every job is backed by the 90-Day Done Right Promise, in writing, no paperwork and no arguing. And a live person answers our phone 24 hours a day, 7 days a week. Not a voicemail. Not a callback queue. An actual human being who knows gates.
Frequently Asked Questions
Yes. We install customer-supplied Elite gates and operators in Wylie regularly. We will inspect the equipment before we quote, because some box-store kits are sized for lighter gates than what ends up on a Wylie driveway. The installation price is the same whether we supply the equipment or you do, and the written quote covers everything before work starts. Call (432) 249-5492 and we will tell you straight if the gear you bought is right for the job.
Self-installation does not automatically void an Elite manufacturer warranty, but incorrect installation can void specific claims. What we see in Wylie is that the board or motor gets blamed when the real issue is wiring done without conduit or a gate hung out of square. An independent install by a company that knows Elite equipment keeps your warranty claims intact because the problem is fixed on the first visit, not band-aided. We use OEM parts when available and quality aftermarket only when the OEM part is discontinued or not viable.
Most Elite installations are done within one to two working days on site once the equipment is in hand and posts are ready. Emergency situations, like a gate that will not close and is blocking a driveway or leaving a property unsecured, get priority scheduling. We do not push installations through faster than the work allows. Concrete needs to cure, welds need to cool, and a gate needs to be tested through its full cycle before we call it done. Call (432) 249-5492 and we will give you a straight answer on scheduling.
A sagging Elite gate in Wylie is usually a hinge or post problem, not a gate problem. The steel is often fine. The post has moved in our clay soil, or the hinge sleeves are worn to egg shapes. We repair sagging Elite gates by resetting and re-plumbing the posts, sleeving or replacing the hinges, and re-hanging the gate square. That costs a fraction of replacement and often gives you another ten to fifteen years out of the same gate. If the frame itself is rusted through at the bottom rail, we will tell you that too, and we will weld in new steel rather than selling you a whole new gate you do not need.
Yes. We run the low-voltage power and control wiring in conduit, install and align the photo eyes, and set the safety edge and obstruction reversal so the gate stops and reverses the way it should. A powered gate is a piece of moving steel, and the safety side of the install is not optional. We test it in front of you before we leave. Call (432) 249-5492 for a free estimate on your Elite gate installation in Wylie.
Get a Straight Answer on Your Elite Gate Installation
If you have an Elite gate going in, replacing, or giving you trouble in Wylie, call (432) 249-5492. We will answer the phone, listen to what is going on, and tell you whether you need a full installation, an operator retrofit, or a repair. The estimate is free. The price is fixed before any work starts. And the work is backed by our 90-Day Done Right Promise, in writing.
Written by Victor Salinas, Owner, Ironworks Gate Co. at Ironworks Gate Co., serving Wylie and nearby areas.