Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Repair for Wylie Homeowners
A gate that drags on its hinges, groans when the motor kicks in, or refuses to close all the way isn’t just an annoyance. It’s a security gap and a safety risk for anyone in your household. Ironworks Gate Co. has handled our Gate Repair in Wylie for homeowners for over 42 years, and we fix the problem the first time, on the first visit, whenever the job allows. We’re Victor Salinas’s team, and we answer the phone live, 24 hours a day, at (432) 249-5492. When your gate won’t budge on a Sunday evening or a hinge gives out before a holiday weekend, we’ll be there. That’s the whole point of a gate company that plans to be in Wylie for another forty years.
What Our Gate Repair Service Includes
Our repair work covers the full range of what goes wrong on a driveway gate: the steel, the hinges, the motor, the keypad, the wiring, the alignment. We don’t patch one symptom and hope the rest holds. Our technicians diagnose the whole gate, explain what’s actually wrong in plain language, and fix it properly. Here’s what falls under our Best Gate Repair in Wylie, TX.
Electric Gate Repair
Electric gate repair means addressing failures in the powered components: the circuit board, the receiver, the keypad, the loop detector, the wiring between them. In Wylie, we see a lot of failures after thunderstorms, when a power surge takes out a control board or a sensor. Our technicians carry OEM parts for the brands we certify on, test each component in sequence, and replace only what actually failed, so you don’t pay for a whole new system when the problem is a $40 sensor.
Automatic Gate Repair
Automatic gate repair is the broader category covering anything in the automated opening system: the motor, the gearbox, the drive arm, the travel limits, the safety edges. We hear the same phrase from Wylie homeowners often: “It worked fine yesterday, now it just hums.” That hum is usually a capacitor or a drive gear, both of which we stock and replace on the spot. If we diagnose a part that needs ordering, we tell you exactly what it costs and when it arrives, before any work is done.
Hinge & Post Repair
Wrought iron and steel gates are heavy. After years of Wylie heat and spring storms, hinges wear into ovals, posts lean, and the gate starts to sag. We repair hinge barrels with new pins and bushings, rebuild post bases with fresh concrete or steel anchors, and re-square the gate so it swings true. This is structural work, not a quick grease job. Our welding experience on gate frames and posts means the fix holds for years, not months.
Gate Realignment
A gate that scrapes the driveway or won’t latch is misaligned, and realignment is one of the most common repairs we do for Wylie homeowners. We check the hinge posts for plumb, inspect the gate frame for twist, and adjust the hinges or the operator travel stops until the gate closes flush. On heavier estate gates, misalignment also puts strain on the motor, so fixing alignment now often prevents a motor failure later. Realignment on a standard driveway gate typically takes under two hours.
Lock Repair
Mechanical locks, electric strikes, maglocks, and keypad-controlled latches all fail eventually. When a gate won’t lock, your property is open to anyone who pushes on it. We repair and replace gate locks across all types: keyed, keypad, intercom, and card reader systems. We also fix the strike plates and receiver posts so the lock actually engages, not just clicks when you hope it does.
Weld & Rust Repair
North Texas humidity and road salt work on every piece of outdoor steel, and no gate coat lasts forever. We grind out rust, weld cracked joints and broken pickets, and re-prime the area so the repair doesn’t rust through in a year. If a section is too far gone, we fabricate replacement parts in-house rather than tell you to buy a new gate. Most rust repairs in Wylie homes are small, contained, and far cheaper than replacement.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Repair
We’re certified to work on nine major gate-automation brands, including LiftMaster, FAAC, BFT, and Linear. With LiftMaster, we’ve replaced everything from gear assemblies to control boards, and we keep the most common OEM parts on our trucks. A LiftMaster gate that won’t respond to the remote is rarely a lost cause, and we can usually have it running within an hour.
On FAAC and BFT systems, both common on Wylie’s newer estate properties, we handle hydraulic and electromechanical operators with the same depth. FAAC 400 and 750 operators need specific oil, pressure checks, and limit adjustments, and we carry the right parts for the job. Linear and BFT residential operators are also well within our certification, and we troubleshoot their travel modules, safety inputs, and receiver boards regularly. Whether your opener has a nameplate we know or something less common, the repair starts the same way: we put hands on it and tell you exactly what’s wrong.
Signs You Need Gate Repair Right Now
Some problems are obvious, like a gate flat on the ground. Others announce themselves quietly, and those are the ones that cost Wylie homeowners the most when ignored. Here are the signs we tell our own neighbors to watch for.
- Grinding or squealing when the gate moves. That sound is metal on metal, usually a failing gear, a dry bearing, or a misaligned chain. Every cycle that makes that noise shaves more life off the motor, so a small repair today beats a full operator replacement next season.
- The gate starts and stops, then gives up. When an automatic gate reverses mid-travel or stops completely, it’s often a travel limit issue, a dying capacitor, or a blocked safety beam. It may still work sometimes, but it won’t for long, and a stuck-open gate is a security problem.
- Physical sagging or scraping on the driveway. A gate dragging a crescent mark into the concrete is telling you the hinge post is moving or the hinges themselves are worn. The motor is working harder every cycle, and the frame is twisting under its own weight.
- Remote or keypad works inconsistently. If you have to press the remote twice, stand closer, or re-enter the code, the receiver, the keypad membrane, or the antenna may be failing. Intermittent electrical issues tend to become permanent at the worst possible time.
- Visible rust at joints and bottom rails. Surface rust is cosmetic. Rust that flakes, blisters, or appears at welds is structural. In Wylie’s humidity, a rusted bottom rail can fail within a couple of seasons, and a fallen gate is a serious safety hazard.
Our Gate Repair Process - Step by Step
We run every repair the same way, whether it’s a sagging hinge in Murphy or a dead operator in Wylie. The process is built to keep the work ahead of the surprises and the final bill exactly where we said it would be.
- 1
You call, a live person answers. That’s it. No phone tree, no answering service. One of our team takes your details, asks what the gate is doing (or not doing), and books a window that works for you.
- 2
We show up and diagnose everything. Our technician walks the gate, the posts, the motor, the controls, and the safety edges. We test components with the gate under load, not just on a bench, because that’s where failures actually show. We explain what we found in plain English, with no pressure and no upsell.
- 3
You get a written quote before any work starts. The price is settled before a single bolt gets turned. You know what we’re fixing, what parts are needed, and what it costs. If we find something else once we’re in the work, we stop and call before we do a thing.
- 4
We complete the repair, usually same visit. Most of our trucks carry the common parts for nine major brands, along with welding gear and structural hardware, so the gate is closing right before we leave. If a part genuinely has to be ordered, we give you the exact lead time and a date for return.
- 5
You get the 90-Day Done Right Promise in writing. We call it the Keystone Standard: if it’s not right, we come back and make it right, every time, no paperwork, no arguing. On a gate we repaired, that promise covers our workmanship and the parts we installed.
How Much Does Gate Repair Cost in Wylie?
Gate repair in Wylie typically runs $185 to $340 for common fixes like hinge replacement, realignment, and lock repair. More involved work, like replacing an operator arm or a control board, usually lands between $350 and $750 depending on the brand and the part. A full operator replacement on a heavier estate gate can run higher, but we quote that before any work is done, and the price doesn’t move on you.
Here’s how the typical line items break down in our Wylie service area:
- Diagnostic and service call: $89, applied toward the repair if you proceed
- Hinge replacement (per pair): $120-$220 depending on gate weight
- Gate realignment: $110-$185 for most standard driveway gates
- Weld repair (cracked joint, broken picket): $90-$180 depending on access and extent
- Control board replacement: $280-$520 depending on brand
- Operator arm or gear assembly: $220-$450 installed
What actually drives the price is three things: the weight of the gate, the access around it, and the availability of the part. Heavier gates need heavier parts and more labor. Tight access means more time. Parts for older or discontinued openers can carry a premium. The way to avoid overpaying is to get a written quote before work starts, and to ask whether the shop is quoting OEM or aftermarket parts. Our free estimate includes the full breakdown, and we honor it.
Gate Repair Near Wylie - Our Service Area
We work throughout Wylie and the surrounding communities: Gate Repair in Murphy, Gate Repair in Lavon, plus Sachse, Lucas, Parker, Rowlett, Fairview, Rockwall, Fate, Princeton, and Allen. Most repairs in Wylie are scheduled within 48 hours, and emergency calls are answered around the clock, every day of the year. You can also find our Gate Repair in Wylie page right here, and our home page covers the full scope of what we do.
Serving Wylie, TX - Our Local Coverage Area
We’re based in the Wylie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Repair in Wylie
Gate repair is the process of diagnosing and fixing any part of a driveway or estate gate that isn’t working correctly, from hinges and posts to motors, circuit boards, locks, and keypads. At Ironworks Gate Co., we treat it as a full-system diagnosis rather than a single-part patch, because most gate failures involve more than one component. Our repair service covers electric and automatic gates, structural repairs, welding, and realignment for Wylie homeowners. We quote the work before we start, and we stand behind the repair for 90 days in writing.
Most gate repairs in Wylie are completed in a single visit, typically lasting between one and three hours depending on the repair. Simple jobs like hinge replacement or realignment are usually done in under two hours, while control board or operator replacements may take longer if components are hard to access. We carry common OEM parts on our trucks for nine major brands, which is why we can finish most jobs on the first trip. If a part must be ordered, we give you a firm date for completion before we leave.
Common gate repairs in Wylie run between $185 and $340, with more involved work like control board or operator replacement ranging from $350 to $750 depending on the brand. Our diagnostic and service fee is $89, and that amount is applied toward your repair if you proceed. We provide a written quote before any work starts, so you’ll always know the total cost up front. You can also take advantage of $50 off any repair over $250, or a free second opinion on any written estimate you’ve received from another company. Call (432) 249-5492 for an exact quote, free of charge.
Yes, we service LiftMaster gate openers and stock the most common OEM parts for them. Our technicians are trained on LiftMaster’s residential and light commercial openers, from gear assemblies to receiver boards and safety input modules. If your LiftMaster is humming but not opening, not responding to the remote, or stopping mid-travel, we can usually diagnose and repair it in one visit to your Wylie home.
Yes. A live person from Ironworks Gate Co. answers the phone 24 hours a day, 7 days a week, including holidays. Emergency Gate Repair in Wylie, TX calls are dispatched as quickly as we can get a technician to you, and we’ll always tell you when you can realistically expect us. If your gate is open and won’t close, or a hinge has failed and the gate is unstable, call (432) 249-5492 any time, day or night.
Every repair we complete is covered by our 90-Day Done Right Promise, which we put in writing for you. If something we fixed is not right, we come back and make it right, with no paperwork, no arguing, and no extra charge. We call it the Keystone Standard, and it applies to every gate repair job we do in Wylie, whether it’s a $90 hinge or a $900 control board replacement.
Before we arrive, clear the area around the gate so our technician has room to work, and make sure the gate is accessible from both sides if possible. Have your remote or keypad code handy so we can test the full operation before and after the repair. If you have pets, keeping them inside during the visit helps us move faster and keeps them safe. We bring all the tools, parts, and equipment needed, so there’s nothing else you need to do.
Schedule Your Gate Repair Service in Wylie Today
Your gate should close every time, quiet and square, like the day it was hung. When it doesn’t, call Ironworks Gate Co. at (432) 249-5492 and talk to a real person. We’ll diagnose the problem, quote the repair in writing before we start, and back the finished work with our 90-Day Done Right Promise. Estimates are free, service is available 24/7, and there’s no obligation. That’s the only way we’ve done it for 42 years.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Wylie since 1984.