A Ironworks company - serving Wylie, TX

DoorKing Gate Motor & Opener Nationwide

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DoorKing Gate Motor & Opener in Wylie: What to Know First

We repair and replace DoorKing gate motors and openers for homeowners throughout Wylie, and most jobs are finished in a single visit. A typical DoorKing motor repair in Collin County runs between $285 and $650 depending on what’s failed, and a full operator replacement on a standard driveway gate usually lands between $1,500 and $3,200 installed. You’ll get a firm price before we turn a single bolt, and every DoorKing job carries our written 90-Day Done Right Promise.

Call (432) 249-5492

This page is for Wylie homeowners who own a DoorKing swing or slide gate and have a motor that’s grinding, dead, or doing something it never did before. If that’s you, call (432) 249-5492. A live person answers, day or night, and we’ll talk through what your gate is doing before anyone schedules a truck.

How DoorKing Products Fail - and How We Fix Them

DoorKing builds solid, long-running operators. We see plenty of them in Wylie that have been in service for 15 or 20 years. But like anything with a motor, gears, and circuit boards, they fail in predictable ways. Here’s what we actually find when a Wylie homeowner calls us about a DoorKing opener.

  • Dead keypad or intermittent board on the 9000 and 9150 swing series. The control board is the brain, and on older DoorKing swing operators it’s not uncommon for the relay that talks to the keypad to wear out. You’ll get a keypad that beeps but won’t open the gate, or a gate that only works from one entry device. The fix is a board-level repair or replacement, and we’ll always check the transformer and wiring before condemning the board. Many “dead board” calls are just a loose terminal.
  • Worn limit cams on the 1601 and 1602 slide gate operators. These operators use physical limit switches that tell the gate where to stop. After years of morning and afternoon cycles, the nylon cams that strike the switches can crack or drift, so the gate slams into the post or stops six inches short. We see this all over Wylie, especially on gates that get heavy daily use. Replacing the cams and re-setting the limits takes well under an hour and usually costs a fraction of a new operator.
  • Noisy primary gear drive on residential swing arms. If your DoorKing swing operator sounds like a coffee grinder, the primary gear from the motor to the output shaft has probably lost its grease or worn a flat spot. DoorKing gear assemblies aren’t always sold individually for residential models, and this is where an independent shop matters: we’ll salvage what’s serviceable, replace what isn’t, and re-grease the gearbox with the right lubricant, rather than quoting you a full operator because one gear went dry.
  • Battery backup that won’t hold a charge. DoorKing operators with battery backup systems are popular in newer Wylie subdivisions where the HOA gets particular about gate access during outages. The batteries are maintenance items, like a car battery. After about three to five years, they sulfate and the gate dies the instant utility power drops. We test, replace, and recycle the old batteries, and we always check the charger board while we’re in there. A charger that never stops charging cooks the new battery within a year.
  • Limit switch failure from dirt and bug debris. Wylie has real summers, and our dirt is fine and persistent. DoorKing limit switch housings on both slide and swing operators can collect enough grit and dead crickets to foul the micro-switches. The symptom is a gate that runs fine sometimes and refuses to move other times. Cleaning and resealing the switch housing often solves it. It’s a small job that saves a lot of frustration, and it’s the kind of thing a generalist contractor misses because the problem isn’t obvious from the outside.

Our DoorKing Gate Motor & Opener Process

Here’s how a typical DoorKing job goes when you call Ironworks Gate Co. in Wylie.

  1. 1
    You call and talk to a person. We answer, 24 hours a day. You’ll tell us the make, what the gate is doing, and when it started. Victor Salinas put it best: “Tell me what it’s doing wrong, and I’ll tell you what it actually needs.”
  2. 2
    We arrive and diagnose on site. Our tech checks power, motor amperage, limit settings, board function, and connections. No guesswork, no firing the parts cannon.
  3. 3
    We give you a written price. Before any work starts. You approve it, or you don’t. We’ll never hand you a surprise invoice because we decided to replace something we didn’t discuss.
  4. 4
    We make the repair. We use DoorKing OEM parts when they’re the right call, and we have quality aftermarket options for older models where OEM parts are discontinued or weeks out. We’ll tell you which is which and why.
  5. 5
    We test the full cycle. Open, close, auto-reverse, safety edges, keypad, remotes, and battery backup if you have one. We watch it run until we’re satisfied it won’t embarrass you at 7 a.m. on a Monday.
  6. 6
    We clean up and back it in writing. The work area is cleaner than we found it, and your repair carries the 90-Day Done Right Promise. If something’s not right, we come back and make it right. No paperwork, no argument.

What DoorKing Gate Motor & Opener Costs in Wylie

Here are honest ranges for the DoorKing work we do most often in Wylie. Your exact price depends on the model, the age, and what we find when we open the operator cover.

  • Service call and diagnosis: $89, credited toward the repair if you proceed
  • Limit switch or cam replacement: $180-$320
  • Control board repair or replacement: $350-$750
  • Gear or gearbox repair on swing operators: $285-$600
  • Full DoorKing operator replacement (residential): $1,500-$3,200 installed
  • Battery backup replacement: $180-$450 depending on battery size and count

What moves the price most is parts availability. Some older DoorKing boards and gear sets are still available new, others are not. When OEM isn’t available, we’ll offer a proven aftermarket option or a full replacement, and the decision is always yours. Call (432) 249-5492 for an exact quote, and remember: our standard offer is $50 off any repair over $250, and we provide a free second opinion on any written estimate you’ve received from another company.

Why Wylie Homeowners Call Ironworks Gate Co. for DoorKing Work

We’ve been working on gates since 1984, and we’ve spent that time learning the brands people actually have on their driveways. DoorKing is one of nine opener lines we service regularly, including LiftMaster, Mighty Mule, and Ghost Controls. That breadth matters more than it sounds like it should, because we can fix your DoorKing without trying to sell you a different brand, but if your operator turns out to be beyond sensible repair, we’ll give you a straight recommendation across brands, not just the one we happen to stock.

Every tech who shows up in Wylie is background-checked and uniformed. Our crew works by a simple code we call K.E.Y.S.: Krafted right, Every time, Your home first, Standing behind it. Around Wylie, people know us as the company that makes a 40-year-old gate close like the day it was hung. We answer the phone when you call, we show up when we say, and the price we quote is the price you pay. That’s a square deal, and we’ve been doing it that way for over four decades.

FAQs

Need Gate Repair help in Wylie? Licensed & insured · 30-60 min response · free estimates
Call (432) 249-5492
Local Service Coverage

Request a Free Estimate in Wylie

Tell us what you need - Ironworks Gate Co. responds fast. No obligation.

By reaching out through this form, you accept our Privacy Policy and authorize us to contact you by phone, email, or text about your request, including by the independent contractors we may refer it to.

Prefer to text? Text Us
Call Now - 24/7 Dispatch